Adjustable Grilling Height Control - Breville 800GRXL Mode D'emploi

USING THE ADJUSTABLE GRILLING HEIGHT
CONTROL FEATURE.
Your Indoor BBQ and Grill™ features an
Adjustable Grilling Height Control feature which
allows you to fix the top plate to a range of
positions above the base plate.
This allows your Indoor BBQ and Grill™ to be
used as an open toaster, ideal for toasting open
panini style 'melts'. It can also be used to grill
delicate ingredients such as fish and hamburger
buns without squashing.
1. Allow the Indoor BBQ and Grill™ to preheat
until the red heating light goes out.
2. Place the food to be grilled on the
base plate.
. Move the Adjustable Grill Control clip on the
right hand side of the Indoor BBQ and Grill™
to the desired height (see Fig 5).
4. Slowly lower the top plate, using the levelling
handle on the top right-hand side of the
plate, until it rests in the appropriate position
above the food (see Fig 6).
5. The top plate will radiate the desired heat
to melt ingredients such as cheese or lightly
grill foods.
14
oPeRAtING yoUR bRevILLe INDooR bbQ AND GRILL™
FIG 5
Note: The Adjustable Grill Height Control
can be moved to accommodate
thick or thin foods by sliding the
clip forwards or backwards along
the arm.
FIG 6
BASE PLATE TILT DIAL
1. To place the base plate into the sloped
position, simply turn the Base Plate Tilt Dial
anti-clockwise until the dial reaches the 'Angle'
position. This position is suitable for achieving
the maximum fat drainage when using the
Indoor BBQ and Grill™ as a closed grill.
2. To place the base plate into the flat position,
turn the Base Plate Tilt Dial clockwise until
the dial reaches the 'Flat' position. This
position is ideal for cooking sausages,
pancakes, eggs, etc when a flat plate is
required so that the foods do not run or
slide off the grill. It is important to use the
flat position when using the Indoor BBQ and
Grill™ as an open grill.