Evaluating The Results - Lanaform WBPM-100 Manuel D'instructions

EN
FR NL DE SL SV
Adjusting to
the correct position
• Rest for about 5 minutes before
taking any measurements. Other-
wise, this may cause errors.
• Measurements must only be
taken when sitting down or prone.
Make yourself comfortable before taking your
blood pressure. Make sure that your back and
your arms are well supported on the backrest
and armrests. Do not cross your legs. Put your
feet flat on the floor. You must support your
arm and fold it. Make sure in every case that the
cuff is at heart level. Otherwise, this may cause
substantial errors. Relax your arm and palms.
• In order not to distort the result, it is important
to remain calm when taking the measurements
and not to talk.
Measuring blood pressure
• Position the cuff as described above and get into
the position you want to take the measurements.
• To start the monitor, press the STOP/START
button . All displays will light up briefly.
(2)
• To choose the memory location you want, press
the memory function button
• The results of measuring 4 different people
or the morning and evening measurements
may be recorded separately in four memories
with 30 places.
• The monitor automatically starts the measur-
ing process.
• You can stop the measuring process at any time by
pressing the STOP/START button
recognises a pulse, the Pulse symbol is displayed.
6
/ 74 WBPM-100 EN Instruction manual
• The results of measuring the systolic pressure
(7)
displayed. The irregular heartbeat symbol (if
there is one)
the measuring results
• Er_ is displayed when the measuring pro-
cess has not been carried out correctly. Read
the chapter Error message/Rectifying errors
in these instructions for use and start taking
measurements again.
• Switch off the monitor by pressing the STOP/
START button
recorded in the user memory you have chosen.
• If you forget to switch off the device, it will switch
off automatically after approximately 1 minute.
• Wait at least 5 minutes before taking another
measurement.

EVALUATING THE RESULTS

Irregular heart beat
• This device is able to identify any irregular heart
beat during the measuring process and displays
it, if necessary, after the measuring process with
the corresponding symbol
• This may indicate arrhythmia. Arrhythmia is
. ( , , or ). a disease characterised by an anomaly in the
(3)
heart rate due to disturbances in the bio-elec-
trical system. The symptoms (heart beats that
are late or early, faster or slower pulse) can be
caused particularly by heart disease, by age, by
natural predisposition, by a diet that is too rich,
by stress or even by lack of sleep. Only a medical
consultation can determine arrhythmia.
. As soon as it If the symbol is displayed after the measuring
(2)
process, start again. Make sure that you rest
, diastolic pressure and the pulse
(8)
and the symbol for ranking
(14)
flash.
(15)
. The measuring result is then
(2)
.
(14)
are
(9)