DNT MusicFly Blue Mode D'emploi page 30

Operation
Select memory
Press repeately the MEM SD-USB-button until the desired
frequency appears in the display.
With every keystroke on the MEM SD-USB-button the next
memory is selected.
Adjust audio input level (Audio in)
In order to have the best signal quality, it is necessary to adjust
the volume of the connected audio device. Follow the below
guideline:
Start playback of the audio device. Adjust the volume to a low
level. Now increase the level until the noise disapears. Keep
the level in mind. Increase the level until a distortion is heard
in the radio. Keep also this level in mind. Now adjust the vo-
lume level to the middle of these 2 values, which you have
determined.
Folders and Files
Feature of supporting fi le index
MusicFly Select has a fi le index feature, that lets you set the
play list as you want. If you use a 3-digit number at the head
of fi le names of each folder, MusicFly Select plays the fi les in
Press briefl y the MEM SD-USB-button. The
display shows [-].
Select a memory (1-7) with the
tons
Press the MENU/REPEAT button once
again.
The device can manage up to 1999 fi les. You
can create folders in the main directory to
manage fi les easier. The folders will be played
in the same order as they are copied onto the
memory device. The MusicFly Select fi nds up
to 20 folders. These folders are shown briefl y
in the display as d1-d20. If no folder is selected
the tracks are played in order.
- 30 -
/ -but-