Display Mode; Storing Frequencies - DNT MusicFly Blue Mode D'emploi

Display mode

This function is available, if an audio device is
connected to the usb port or a SD card is in the
slot.
:Frequency
Repeat
This function is available, if an audio device is
connected to the usb port or a SD card is in the
slot.
The MusicFly Blue has a repeat function. If the repeat function
is on, the tracks are played repeately.
Press the MENU/F.REPEAT-button during playback for 2
seconds.
The display shows in order:
repeat the current track
Press the MEM/D.REPEAT-button during playback for 2
seconds.
The display shows in order:
repeat the current folder

Storing frequencies

Adjust the display intervall time with the
/ buttons (2-6 seconds).
Press the MENU/F.REPEAT button once
again.
Press and hold
2 seconds to switch the display mode.
:Audio level
Select the desired frequency
- 29 -
Operation
-button during playback for
:remaining
playback time
normal
normal