DNT MusicFly Blue Mode D'emploi page 27

To continue operation, slide the cover down-
wards.
Additional Bluetooth settings
Automatic pairing
If the menu for the settings is active, then a LED
below the MENU/F.REPEAT button appears.
Setup fequency
Press the MENU/F.REPEAT-button.
Adjust the frequency with the
Press the MENU/F.REPEAT-button once again.
Source select
Playback
Buttons are illuminated: The device is
paired with a mobil phone.
Buttons are not illuminate: Bluetooth is
not activated.
Press 5 times briefl y the MENU/F.REPEAT
button
Select Ato or NOR with the
Ato: The MusicFly tries to link to the last con-
nected device.
NOR: The MusicFly doesn't establish a link.
Press repeately the PHONE/SD-USB button.
SD card
USB host connector
MP3 from mobil phone
Press the - button for playback or pause.
Getting started
/ -buttons.
- 27 -
/ buttons.