Thoroughly Cleaning The Robot Vacuum Cleaner - TechniSat TECHNIMAX SR1 Guide De Démarrage Rapide

4. Carefully clean the filters and the dust bin under running water. Allow all parts to dry completely before
reassembling them in reverse order and placing them in the robot vacuum cleaner.
Pre-filter
Filter cover
The filter unit consists of the filter cover, the pre-filter (foam) and the HEPA filter (paper).
When assembling the filter system, first insert the pre-filter into the filter cover and then the HEPA filter. Then
put the filter cover with the pre-filter and HEPA filter back into the lid of the dust bin.
When inserting the dust bin into the robot vacuum cleaner, press lightly on the dust bin until it clicks into place.

5.4 Thoroughly cleaning the robot vacuum cleaner

We recommend thoroughly cleaning the robot vacuum cleaner after each use. This includes the brushes on the
bottom, the crash sensors on the bottom and the sensor panel on the front.
HEPA filter
EN
FR
IT
NL
PL
25