Olympus Camedia C-4000 ZOOM Manuel D'utilisation page 37

Playback on a TV
1
Make sure that the TV and camera power are off .
2
Connect the camera's VIDEO OUT jack to the TV using the video
cable.
Connect to the TV's video
input (yellow) terminal.
3
Set the mode dial to
mode.
● For details on switching to video input, refer to your TV's instruction
manual.
4
Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
● There may be times when you want to rotate a picture. With picture
rotation, you can turn them horizontally, 90 degrees clockwise, or
counter-clockwise. Each time the
rotated.
● Make sure that the camera's video output signal type is the same as the
TV's video signal type.
Mode dial
setting
Connector cover
Video cable
. Turn on the TV. Set the TV to the video input
Note
Mode dial
Connect to the VIDEO OUT jack.
button is pressed, the picture is
En
37