Pelgrim PVS3102N Notice D'utilisation page 22

22
min.
200 cm
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do the following steps:
1. Install the appliance in the niche.
Push the appliance in the direction of the
arrows (1) until the upper gap cover
stops against the kitchen furniture. Make
sure that the distance between the ap-
pliance and the cupboard front-edge is
44 mm.
Push the appliance in the direction of the
arrows (2) against the cupboard on the
opposite side of the hinge. Make sure
that the clearance between the appli-
ance and the cupboard is 4 mm.
2. Adjust the appliance in the niche.
The lower hinge cover (in the accesso-
ries bag) makes sure that the distance
2
min.
200 cm
2
2
1
between the appliance and the kitchen
furniture is correct.
Open the door. Put the lower hinge cover
in position.
4mm
44mm
3. Attach the appliance to the niche with 4
screws.
4. Push the sealing strip between the ap-
pliance and the adjacent cabinet.
I