BORETTI PURO Serie Guide D'installation page 16

Fault
Module does not work.
GUARANTEE:
The Guarantee conditions are available at
ENVIRONMENT-FRIENDLY WASTE PROCESSING:
BORETTI PURO complies with the requirements of the European Directive concerning Waste Electrical and Electronic Equipment (WEEE).
This Directive contains stipulations in force in the EU concerning the return and processing of scrap equipment.
Also ensure environmentally friendly processing of the waste packaging material.
This user manual has been prepared carefully. However, no rights may be derived from any printing or spelling errors.
AFTER SALES SERVICE:
Please, visit www.BORETTI.com
Possible cause
The plug is not inserted in the
socket.
Power cut.
Blown fuse.
If the error is not resolved after these operations, please refer to our Helpdesk.
www.boretti.com
Solution
Insert the plug into the wall
socket.
Check whether other kitchen
equipment is working. In case it's
not, put the power on again.
Check if the socket is working by
connecting another electric
device. In case of blown fuse,
substitute it.
Page 16 of 24