Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Content of sales box:
A - Boretti PURO Filter 400 / 500 / 800 / 1000
B - N. 2 O-rings
C - Double socket plug
D - Eccentric-Adapter
Technical data:
210-250V~50Hz, 10W
Cooker Hood filter
To install PURO, proceed as follows:
1. Remove the chimney shaft
2. Remove the exhaust hose
and disconnect the hob from
or the charcoal filter and close
electric power
(if present) the exhaust hole a)
6. Connect the hood- and filter
7. Connect the double socket
plug to double socket plug "C"
plug "C" to the electric socket
fi/nc1 708201 7
(Art. Nr. 8709)
(Art. Nr. 8706)
(Art. Nr. 8901)
The
plasmaNorm® RONDO retrofit
a)
3. Slip one O-Ring over the
motor Nozzle "F"
8. Reposition the chimney shaft
Installation manual
B
filter is placed on the exhaust hood motor (Fig. E)
D
Position the
F
adapter "D"
only if the
motor exhaust
nozzle is too
close to the
wall
4. If adapter "D" is needed, place it on the motor
nozzle "F" with the assembled O-Ring. Slip the 2
O-Ring over the adapter "D" upper nozzle.
The maximum life time of
the filter is only guaranteed with
regular cleaning of the grease
filters of your cooker hood.
Please, ensure that the
ventilation slots in your hood
chimney are open and allow
enough ventilation, to ensure the
right air circulation
A ccesso ries can be changed by the facto ry witho ut prio r no tice but granting same functio nality
A
D
C
Picture "C" just for illustration purposes
F
5. Connect the filter "A" to the adapter "D" or
nd
directly to the nozzle "F" with the assembled O-
ring/s
Declaration of Conformity
The manufacturer of the product/s described herein, to
w hich this description refers, declares on its sole
responsibility that the product/s meet the relev ant
fundamental safety , health and protection requirements of
the relev ant EU guidelines and that the corresponding
test reports are av ailable for ex amination by the relev ant
authorities and can be requested from the seller of the
appliance, especially w ith regard to CE Declaration of
Conformity issued by the manufacturer or w ith the
manufacturer's approv al.
E
Publicité
Table des Matières
