Using the battery charging bay
The battery charging bay at the rear of the Docking Station
enables you to charge the tablet and a spare battery at the same
time. You can change the battery in the charging bay while a
tablet is docked (hot-swapping) and in use or when a tablet is not
docked (warm-swapping).
WARNING:
While charging the battery during hot-swapping,
avoid lifting the tablet and disconnecting the tablet from the
docking connector on the Docking Station, which will cause a
power loss to the tablet.
When the Docking Station is used only for charging the tablet
battery and spare battery, set the viewing angle to 15° to save
space and improve stability.
Note: For information about the status lights and the battery
charging states, see "Reading the status lights" on page 6.
•
To charge the tablet, place the tablet into the Docking Station.
•
To charge an additional battery, insert a battery into the
battery charging bay.
Note: The spare battery continues to charge when the tablet is
not in the Docking Station.
English
Battery in the charging bay
11