Blue Angel Pumps SBS50 Guide D'instructions Et Pièces De Rechange

Operating Instructions and Parts Manual
Description
Shallow well jet pumps are single stage
domestic water pumps designed for
pumping portable water in applications
where the water is located less than 25
feet vertically from the pump. A pres-
sure switch is a standard feature. The
shallow well pump can be mounted to
either a precharged, conventional type
or free standing pressure tank.
Unpacking
After unpacking the jet pump, carefully
inspect for any damage that may have
occurred during transit. Check for
loose, missing or damaged parts.
Safety Guidelines
This manual contains information that
is very important to know and under-
stand. This information is provided for
SAFETY and to PREVENT EQUIPMENT
PROBLEMS. To help recognize this
information, observe the following
symbols.
Danger indicates
an imminently haz-
ardous situation which, if not avoided,
will result in death or serious injury.
Warning indicates
a potentially haz-
ardous situation which, if not avoided,
could result in death or serious injury.
Caution indicates a
potentially haz-
ardous situation which, if not avoided,
may result in minor or moderate injury.
Notice indicates
important infor-
mation, that if not followed, may cause
damage to equipment.
General Safety
Information
1. Read the instruction manual included
with the product carefully. Be thor-
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2007 Blue Angel™ Pumps
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or
maintain the product described. Protect yourself and others by observing all safety information. Failure to
comply with instructions could result in personal injury and/or property damage! Retain instructions for future
reference.
Jet Pump Water Systems
oughly familiar with the controls and
the proper use of the equipment.
2. Know the pump application, limita-
tions and potential hazards.
to match the system pressure rating and
the maximum flow rate.
sive fluids such as gasoline, fuel oil,
kerosene, etc. Do not use in explosive
atmospheres. Pump should only be used
with liquids compatible with pump com-
ponent materials. Failure to follow this
warning can result in personal injury
and/or property damage.
sure from the system before attempting
to install, service, relocate or perform any
maintenance. Lock the power disconnect
in the open position. Tag the power dis-
connect to prevent unexpected applica-
tion of power.
pipe to prevent entrapment of swimmers.
3. Drain all liquids from the system
before servicing.
4. Secure the discharge line before
starting the pump. An unsecured dis-
charge line will whip and possibly
cause personal injury and/or property
damage.
5. Check hoses for weak or worn condi-
tion before each use. Make certain
all connections are secure.
6. Periodically inspect pump and system
components. Perform routine main-
tenance as required (See
Maintenance).
7. Personal Safety:
a. Wear safety glasses at all times
when working with pumps.
b. Keep work area clean, unclut-
tered and properly lighted -
replace all unused tools and
equipment.
c. Keep visitors at a safe distance
from work area.
For parts, product & service information
visit www.blueangelpumps.com
8. Do not pump chemicals or corrosive
Always install a
pressure relief valve
Do not use to pump
9. When installing pump, cover the
flammable or explo-
10. Always test the water from the
Disconnect power
and release all pres-
11. Complete pump and piping system
Install a screen
around the inlet
12. Do not run the pump dry or dam-
designed for indoor installation only.
licensed or certified electrician.
13. For maximum safety, the unit
14. Before installing the pump, have
15. Make sure the line voltage and fre-
16. Do not attempt repairs to the electric
SBS50, SBS75, and SBS100
d. Make the workshop childproof
use padlocks, master switches
and remove starter keys.
liquids. Pumping these liquids
shortens the life of the pumps seals
and moving parts and will void the
warranty.
well to prevent foreign matter
from falling into well and contami-
nating the water and damaging
internal mechanical pumping com-
ponents.
well for purity before use. Check
with local health department for
test procedure.
MUST be protected against below
freezing temperature. Freezing
temperatures could cause severe
damage and void the warranty.
age will occur and will void warran-
ty.
Risk of electrical
shock. This pump is
All wiring should be
performed by a
should be connected to a grounded
circuit equipped with a ground
fault interrupter device.
the electrical outlet checked by a
licensed or certified electrician to
make sure the outlet is properly
grounded.
quency of electrical current supply
agrees with the motor wiring.
motor. All repairs to the motor must
be completed at a licensed or certi-
fied electrical motor repair shop.
340100-002 1/07