Signals Library - AVS Electronics BM60HP Mode D'emploi

Signals library

Access to this menu imposes to choose the type of connection; USB - PSTN/GSM.
For a connection in local it is necessary:
1- to power the barriers
2- to connect the barrier receiver to the computer using the USB connection.
note: if first connection, carry out the drivers loading procedure for the recognition of the peripheral.
3- to select the barrier address on HPSOFT and then choose "connect"
Once connected, access is gained to the library of signals recorded in barrier by the installer.
Signals considered "FALSE ALARM" and others considered as "ALARM" can be found in this
customised library.
Symbols:
FALSE ALLARM
ALLARM
Data loading procedure
1- Select the satellite - the barrier: "current satellite"-"current detector"
2- Select which type of signal is to be loaded
3- Start the process: press "Load Record List"
4- The events complete of Record Number and "ALARM/FALSE ALARM" symbol will be displayed
5- To completely delete the signals library: press "Empty Library"
Signals displaying procedure
6- Click on show signal; the software will load the information directly
from the barrier and the saved signal will be displayed.
7- Press Ok to close the screen
8- Press "Delete" to delete this signal from the library and confirm.
9- Confirm deletion of the signal.
- 61 -
E
N
G