Status Led; Charging The Built-In Batteries - Gigaset ZX530 Mode D'emploi

3.3 Status LED

Headset status
Off
On
Pairing mode
Pairing
Standby mode
Ringing
Active call
Charging
Charging complete

3.4 Charging the built-in batteries

The Gigaset ZX530 is equipped with a built-in battery, which must
be fully charged before using the headset. Charging takes about
2 hours. You can either charge the headset with the mains charger
or via a USB connection, e.g. to your PC.
Note:
Take care that the USB plug is in the correct position and do
not use force. Use the USB symbol on the plug and in the
illustration above as a guide. The headset must be set to off for
charging. Set the sliding switch to the OFF position (down) to
start charging.
The headset cannot be used while it is being charged.
18
LED colour Status
Red Flashes 3x
Blue Flashes 3x
Red-blue Alternate fl ashing
Blue Flashes 5x
Blue Flashes 1x every 7 seconds
Blue Flashes 3x every 7 seconds
Blue Flashes 1x every 7 seconds
Red Illuminates constantly
Blue Illuminates constantly