Fein Turbo I Mode D'emploi page 15

Mounting and cleaning the flat-fold
filter (figure 8).
Before switching from wet to dry vacu-
uming, allow the wet flat-fold filter to
dry or replace with a dry flat-fold filter. Oth-
erwise, the flat-fold filter will become unus-
able.
Keep the flat-fold filter dry and clean it regu-
larly.
For removal, press the lock inward and
remove the filter cartridge as well as the flat-
fold filter.
After removing the flat-fold filter, clean the
flat-fold filter regularly by firmly tapping it
against the floor. For this, do not take the flat-
fold filter out of the filter cartridge. The filter
cartridge protects the flat-fold filter against
damage.
Insert the cleaned (or a new) flat-fold filter
into the filter cartridge and mount the car-
tridge into the bracket lugs as well as to the
locking fixture.
4.
Flat-fold filter
Fig. 8
3.
5.
Filter cartridge
6.
6.
en
15
1.
2.