Abus TVIP11560 Notice D'utilisation page 117

English
Now select a week day for the alarm input. To store particular time periods, enter a start and end time.
To activate the alarm input all day, select 00:00 as the start time and 24:00 as the end time.
To apply the settings for all week days, click the "Select All" checkbox. To copy the settings to certain other
week days, select the week day and click on "Copy".
To apply the changes, click "OK" and to discard them click on "Cancel".
Linkage Method
Make the setting here for which action an alarm should be performed.
Normal Linkage
Acoustic signal: An alarm tone sounds on the camera.
Send an e-mail: You receive an e-mail as notification, activate the checkbox for this to be performed.
Save instant image: Activate the checkbox to upload the alarm input to an FTP server.
Activate recording
: This activates the recording on the internal micro SD card.
Other Linkage
You can switch on the alarm output for when an alarm is detected.
Click on "Select All" to switch on the alarm output.
116