Storage In Case Of Longer Stopping Periods; Technical Assistance; Assembly Instructions; Montagem Das Rodas - Vito Agro VIMETD7 Mode D'emploi

Storage in case of longer stopping periods

Allow the combustion engine to cool down before
placing the machine in a closed room.
Never store the equipment with petrol in the tank inside
a building. Petrol vapours may come into contact with
flames or sparks and ignite.
Store the tiller in a dry area with the fuel tank empty
and the fuel in a well-ventilated compartment.
If you wish to empty the tank, for example before the
winter period, the fuel tank should only be emptied
outdoors.
Clean the equipment thoroughly before storage,
especially in winter.
operating mode.
Make sure the device is protected against misuse (for
example, by children).

Technical assistance

Your tiller should
manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with
original parts sourced directly from the manufacturer.

ASSEMBLY INSTRUCTIONS

Before starting assembly, refer to the safety
instructions.
Carry out all assembly work on a horizontal, firm and
clean surface. Respect the assembly positions and
always ensure a stable and safe position of the
appliance.
Wear tight gloves when working with the tines.
46
Keep the device in a good
only be serviced

Montagem das rodas

Drive wheels
1. Install both wheels on the shaft;
2. Fit the wheels shaft to the drive shaft;
3. Insert the shear pin in the wheel shaft hole and in the
drive shaft hole. Insert the split pin;
Pay attention to the direction of rotation of the
wheels.
Shear pin
by the
Split pin
Front wheel
1. Remove the split pins from the front wheel holder
(2);
2. Adjust the wheel holder;
3. Insert the shear pin with larger diameter on the
central hole of the fixed holder and in the upper hole
in the wheel holder.