Hardware Contents; Hardware List; Assembly Instructions - Broil Chef 6695005 Guide De L'utilisateur

Hardware listed above is not scaled to exact size.
(A screwdriver is required on assembly and is included for your convenience).

Assembly Instructions

Remove all contents from the carton packaging. Make sure all parts
are present before attempting assembly. Once the grill is fully
assembled, go back and check to make certain all the bolts are
secure. Tighten again using the screwdriver provided if necessary.
Estimated Assembly Time: 20 minutes.
Step 1
a) Align the holes on the right back side of body assembly (L) with the
holes on the lower hinge (D).
b) Insert one bolt (BB) into the pre-drilled hole, tighten with one flat
)
washer (DD one lock washer (CC) and one nut (EE)
c) Repeat the procedure for the left back side of body assembly.
d) Go back and tighten all the bolts using the screwdriver provided.
GPT1813G
Instruction Manual
Guide d'utilisation
All manuals and user guides at all-guides.com

Hardware Contents

AA: 1 PC
Wrench
DD: 14 PCS
Flat Washer
GG: 7 PCS
M6 Lock Washer
JJ: 1 PC
Screw Driver
BB: 14 PCS
M5 × 10 Bolt
EE: 14 PCS
M5 Nut
HH: 7 PCS
Flat Washer
KK: 2 PCS
R Pin
6
CC: 14 PCS
M5 Lock Washer
FF: 1 PCS
M6 x 7 Bolt
II: 6 PCS
M6 Nut
LL: 2 PCS
Lid Pin