Easystart; Pressure Sensor - Philips sonicare 3000 Serie Mode D'emploi

EasyStart

Brush head replacement reminder

Pressure Sensor

This Philips Sonicare model comes with the EasyStart
feature activated. The EasyStart feature gently
increases the power over the first 14 brushings to help
you get used to the brushing with the Philips Sonicare.
To deactivate EasyStart see 'Activating or deactivating
features'.
Your Philips Sonicare is equipped with BrushSync
technology that tracks the wear of your brush head.
Note: This feature only works with Philips Sonicare
smart brush heads with BrushSync technology.
When attaching a new smart brush head for the
1
first time the handle recognizes that you have a
Philips brush head with BrushSync technology and
begins tracking brush head wear.
2 Over time, based on the pressure you apply and
the amount of time used, the handle will track
brush head wear in order to determine the optimal
time to change your brush head. This feature gives
you the guarantee for the best cleaning and care
of your teeth.
3 When the brush head replacement reminder light
lights up amber, you should replace your brush
head.
To deactivate the brush head replacement reminder
see 'Activating or deactivating features'.
Your Philips Sonicare is equipped with an advanced
sensor that measures the pressure you apply while
brushing. If you apply too much pressure, the
toothbrush will provide immediate feedback to
indicate that you need to reduce the pressure. This
feedback is given by a change in vibration and
therefore brushing sensation and sound. Additionally,
the brush head replacement reminder light will flash
amber.
13
English