A
Preview of the appliance
Description of the appliance
Tank
1
Power Cord
2
Drum
3
Lint filter
4
Control panel
5
Accessories
The following parts are optional depending on the model.
If your dryer has the following parts, install them according to the instructions below:
Hose holder (optional)
Condensation drain hose (optional)
Installation:
Step 1: Remove the drain hose from the hose connector with pliers
Step 2: Insert the external drainage pipe
Door
6
Air supply
7
Handle
8
Maintenance grille
9
4
EN
A
Preview of the appliance
Quick operation
1. Check that the tank and filters
have been cleaned.
2. Open the door and
load the laundry.
3. Close the door to
the machine.
4. Connect the power cable and press
the [ON/OFF] button.
5.Select the desired programme.
6. Press the "Start/Pause"
button.
Control panel
Programme selection button
1
LED indicator (Del., 3h, 6h, 9h, 12h,
2
Child Lock, Filter, Full and Anti-
crease)
Special function buttons (Delay, Anti-
3
crease, Child Lock)
10. Unplug the power cord.
9. Clean the filters and empty
the tank.
8. Press the ON/OFF button.
7. Remove the laundry once
the programme is finished.
ON/OFF button
4
Start/Pause button
5
Operation light indicator
6
5
EN