C
Useful information
Precautions
Problems
Solution
•
Check that the mains plug is connected.
The power indicator light
•
Check the selected programme.
does not light up.
•
Check the condition of the fuses in your home.
•
Empty the condenser tank.
The "Full" indicator is
permanently lit.
•
In case of failure, check the hose for the condensation outlet.
•
Make sure you press the start button.
•
Check that door is closed.
The dryer does not start.
•
Make sure you have selected a programme.
•
Make sure that the machine is correctly installed in a horizontal
Water is leaking from
the machine.
position.
•
Push the door closed until you hear a "click".
The door opens by itself.
•
Ventilate the room properly.
The humidity level in
•
Clean the cooling grille.
the room increases
considerably.
•
Check that the condenser has been installed correctly.
•
Clean the filter and the condenser.
•
Empty the tank.
Drying is not optimal or
•
Check the water outlet.
the drying time is too
•
The environment where the machine is installed is too small.
long.
•
Check the humidity sensors.
•
Use a stronger drying programme.
If you cannot solve the problem alone and need help:
1. Press the ON/OFF button.
2. Disconnect the mains plug and contact customer service.
16
EN
Note
17
EN