Maintenance/Servicing; Cleaning The Cabinet; Disc Handling - Magnavox H2160MW9 A Guide Rapide

Supplied Accessories
remote control (NB820UD) with batteries (AAx2)
RF coaxial cable (WPZ0901TM002 / WPZ0901TM005)
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)
owner's manual (EN/FR) (1VMN26793/1VMN26794)
quick guide (EN/FR) (1VMN26795/1VMN26796)
Maintenance
Servicing
• Please refer to relevant topics on "TROUBLESHOOTING"
on pages 113-117 before returning the product.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn the unit to the standby mode, unplug
the power plug and please call our help line mentioned
on the front page to locate an Authorized Service
Center.

Cleaning the cabinet

• Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
4 4 EN EN
SAFETY INFORMATION
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning
• Do not use solvents such as benzine, thinner,
Cleaning the disc lens
• If this unit still does not perform properly

Disc handling

• Handle the discs so that fingerprints and dust do not
• Always store the disc in its protective case when it is
HDD handling
• HDD is a precision apparatus that is susceptible
• HDD rotates at high speed when in operation. Be sure
IR signal check
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
AM radio or a digital camera (including built-in camera
of cellular phone). It will help to define the cause of
malfunction.
• With an AM radio:
• With a digital camera (including built-in camera of
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
although you refer to the relevant sections and to
"TROUBLESHOOTING" in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
adhere to the surfaces of the discs.
not used.
to vibration, strong impact or dirt. Depending on
the installation environment or handling, the unit
may become partially damaged or in the worst
case, recording or replaying may not be available.
Especially while the HDD is in motion, do not subject
it to vibration or strong impact or pull out the power
plug. And if a power failure occurs, the content of the
recording / replaying program may be lost.
that rotation has stopped and then move the unit
without subjecting it to strong impact or vibration.
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.
cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control. If
infrared light appears through digital camera,
the remote control is working.