GO/ON 2303 Traduction Des Instructions D'origine page 55

Original Instruction Manual
1. Side handle
3. Sanding base 93mmx93mmx93mm
5. Speed control
7. Allen key
9. Sanding paper 3pcs
OPERATON
Before use
Before making assembly, changing and adjustment for any accessory, disconnect the
tool from the mains supply to avoid any unintentional starting.
Please always check the mains supply voltage before use! It must correspond with the
rating label on the appliance.
Remove any packing material and loose parts from unit.
Check the accessories before use. It should be fit with the machine and your purpose.
Mounting accessories
For ac cessories at tached ( saw bl ade, s craper an d s anding p ad), us e the clamping
screw in combination with the retaining ring.
• Remove the clamping screw using an Allen key.
• Replace t he tool a nd t ighten i t us ing the c lamping s crew. C heck that t he tool i s
secure in the chuck and that the machine is correctly secured and supported.
Dust collection tube
Dust collection tube makes the workplace easy to keep clean.
7
2. ON/OFF switch
4. Dust collection tube
6. Standard saw blade
8. Scraper
Clamping screw
Retaining ring
En
01/2017