p Do not block the vent.
Doing so may cause the printer to heat up, possibly resulting in fire or
electric shock.
• Do not block the top or side vent.
• Do not put the printer in the following places.
p Do not put the printer on an unstable surface such as a shaky
table.
If the printer falls out of place, it may injure someone. This may also
damage the printer or cause the printer to malfunction.
p Do not touch the non-user-serviceable parts inside the printer.
Doing so may cause injury or burns. This applies especially to children
and those unfamiliar with the printer.
p Do not move the printer while the power cord is taut.
Doing so may damage the cord, possibly resulting in fire or electric
shock. When moving the printer, unplug and bundle the power cord.
p Do not pull the cord with a jerk.
To unplug the power cord, hold it by the plug.
Pulling the cord may damage it, possibly resulting in fire or electric
shock.
p Do not hold the power cord plug with wet hands.
Doing so may cause an electric shock. Be sure hands are dry before
handling.
8
E
NOTE
– Badly-ventilated place
– On a soft surface like a rug or bed