Olympus CAMEDIA P-300E Instructions page 7

p Do not disassemble or modify the printer.
The printer has both hot and high voltage parts on the inside. To
prevent an electric shock or printer malfunction, do not attempt to
disassemble or modify the printer. For service or repair, contact your
dealer.
p Do not place liquids on the printer.
Should any liquid penetrate the printer, it may result in fire or electric
shock.
p Do not place heavy objects on the printer.
Doing so may deform the printer cabinet, resulting in fire or electric
shock. If the printer falls out of place or is dropped, it may cause
damage.
p Do not install the printer in the following places.
To prevent fire, electric shock, and printer malfunction do not install
the printer in the following places.
• Dusty, humid, or oily places
• Extremely hot places
p Do not use the printer with a power supply other than that
specified.
Incorrect voltage may damage printer parts, possibly resulting in fire or
electric shock.
p Connect the power cord correctly.
For example, if the power cord is plugged in loosely, it may cause a fire
or electric shock. Push the plug all the way into the outlet.
6 E
WARNING
Should any dust or liquid penetrate the printer, it may result in fire
or electric shock.
Do not expose the printer to direct sunlight or extremely high
temperature such as near a heater. Doing so may deform the printer
cabinet, resulting in fire or electric shock.
Use the printer at the ambient temperature of 5 to 35 °C (41 to 95° F)
and humidity of 20 to 80 %.