Operating Remote Control - Napoleon Cineview NEFB26H Manuel D'installation Et D'utilisation

operating instructions
EN
6.2

operating remote control

note:
When operating the remote control, it must be directed towards the front of the control panel.
18
W415-2945 / B / 12.22.20
Turns the appliance on / off.
Power
Controls blue flame brightness.
Settings:
BF4 - Brightest flame
Blue
BF3 - Bright flame
Flame
BF2 - Dim flame
BF1 - Dimmest flame
BF0 - Flame off
Controls orange flame brightness.
Settings:
OF4 - Brightest flame
Orange
OF3 - Bright flame
Flame
OF2 - Dim flame
OF1 - Dimmest flame
OF0 - Flame off
Controls ember bed light settings.
Settings:
L-1 - Red
L-2 - Blue
Ember Bed L-3 - Green
Colour L-4 - Light green
L-5 - Yellow
L-6 - Purple
L-7 - Autocycle
L-8 - Lock the desired colour during cycle
Controls the brightness of the ember bed light.
NOTE: If the ember bed colour is set to L-7, the ember bed
brightness setting cannot be changed.
Settings:
Ember Bed
B-4 - Brightest
Brightness
B-3 - Bright
B-2 - Dim
B-1 - Dimmest
B-0 - Off
B-5 - Fade in and out
Controls flame speed.
Flame Speed Settings:
S-3, S-4, S-5, S-1, S-2
Continued on next page