8. Reinstall brick panels if they have been removed (Fig. 3-8). Ensure the tabs fit into the slots along the bottom
of the firebox (Fig. 3-9) before securing the brick panels in place using the 2 screws previously removed in
step 4 (Fig. 3-10).
Framing
hidden for
clarity
9. Install media (see "finishing" section).
10. Reinstall the glass door.
11. Reinstall the front decorative cover held in place by 2 magnets.
Tabs
Fig. 3-8
Repeat on
opposite side.
installation
Framing
hidden for
Repeat on
opposite side.
Slots
Fig. 3-10
W415-2945 / B / 12.22.20
EN
clarity
Fig. 3-9
13