Meec tools 018625 Mode D'emploi page 25

ADJUSTING THE FLAME
The length of the flame can be adjusted from 12 to 25 mm. Long
flames consume a lot more fuel.
1. Turn the adjuster ring for the air flow so that the flame gets
smaller for a lower flame temperature.
WARNING!
The adjuster ring for the air flow is hot – risk of burn injury.
Put out the flame and allow the product to cool before adjusting.
TURNING OFF
1. Turn the stop valve all the way clockwise. Check that the
flame is out and that the product has cooled before putting
it away.
EN
25