Before Using; Clean Before First Use; Assembling - Bravetti F1047BP Guide Du Propriétaire

Before Using

Fig. 1

CLEAN BEFORE FIRST USE

1 Remove all packaging material and
any stickers. Read all literature.
2 The frying basket, handle and break-
away safety cord are inside the fryer.
Press the lid release button to open
the pop-up lid.
3 Tilt the lid forward and pull up to
remove. (Fig. 1)
4 Wash the detachable lid, frying basket
and detachable handle in hot, soapy
water and wipe dry thoroughly, or you
may wash the detachable lid, basket
and handle in the dishwasher on the
top rack.
5 Wash the inside and outside of the
deep fryer with a drop of soap on
a damp cloth. Rinse with a cloth
dampened with water only and dry
thoroughly with a dry cloth or paper
towel before adding oil.
WARNING: DO NOT immerse the
deep fryer or break-away safety cord
in water. Do not put the deep fryer
or break-away safety cord in the
dishwasher.
WARNING: All components must be
completely dried before filling the
reservoir with oil and using.
8 TOLL FREE:
F1047BP_15_IB_ENG_FRE_101207BW.indd 8
Fig. 2

ASSEMBLING

1
1-800-798-7398
Fig. 3
WARNING: Special care must be taken
to ensure the filter compartment and
removable lid are dry, otherwise steam
may become dangerously trapped
inside the fryer during use.
WARNING: Never plug the deep fryer
into the electrical outlet while the oil
reservoir is empty.
Plug the break-away safety cord into
the back of the deep fryer. Make sure
the top of the plug reads 'THIS SIDE
UP'. You will feel a magnetic pull if
installed correctly. (Fig. 2)
NOTE: Your deep fryer has been
specifically designed with your safety
in mind and is equipped with a unique
detachable power supply cord. This
power supply cord is designed to
'break away' from the fryer in the
event that the power cord or fryer is
inadvertently pulled or tugged.
WARNING: The break-away safety
cord is intended to prevent the tipping
of the appliance and hazardous
spillage of hot oil. It is NOT intended
to disconnect the fryer during normal
use.
10-12-07 11:11 AM