Specifications, Features And Warranty; F6-Dp Specifications; Epa Certification; Warranty - JB INDUSTRIES F6-DP Instructions D'utilisation

JB INDUSTRIES

SPECIFICATIONS, FEATURES AND WARRANTY

F6-DP SPECIFICATIONS

Refrigerants��������������������������������������������� R-12, R-1234yf, R-134a, R-22, R-32, R-401A, R-401B,
Power ���������������������������������������������������������������������������������������������������������115 V (ac), 60 Hz, 12 A,
Protection ������������������������������������������������������������������������� High pressure switch cutoff at 550 PSI
Pressure ����������������������������������������������������� Low side design pressure 350 PSI (2�4 MPa, 24 bar)
Temperature ���������������������������������������������������������������� Operating range 10 to 40°C (50 to 104°F)
Pollution degree ��������������������������������������������������������������������������������������������������������������������������� 2
Ingress protection �������������������������������������������������������������������������������������������������������������������IP20

EPA Certification

(F6-DP) ������������������������������������������������������Certified for all refrigerants listed under categories III,

WARRANTY

JB Industries warrants the F6-DP Refrigerant Recovery Machine to be free from defects of
materials or workmanship for three years from the date of purchase� JB Industries does not
warrant any machine that has been subjected to misuse, negligence, or accident, or has been
repaired or altered by anyone other than JB Industries�
The compressor is warranted for a period of three years by the manufacturer� To keep this
warranty in force, a filter (included) must be used on the inlet port or hose at all times to
prevent particulates from entering the compressor� Failure to use the included filter will void the
compressor warranty�
JB Industries liability is limited to repairing or replacing, at its option, a defective machine or
part� If a defect arises, a valid claim must be received by JB Industries, with transportation
prepaid, no later than thirty (30) days after the warranty period expires� JB Industries will
determine whether the machine has malfunctioned due to defective materials or workmanship�
This warranty is in lieu of all other warranties, expressed or implied, whether of merchantability,
fitness for a particular purpose, or otherwise� All such other warranties are expressly
disclaimed�
JB Industries shall have no liability in excess of the price paid to JB Industries for F6-DP-250,
plus return transportation charges prepaid� JB Industries shall have no liability for any
incidental or consequential damages� All such liabilities are excluded�
6
F6-DP OPERATING MANUAL
R-401C, R-402A, R-402B, R-404A, R-407A, R-407B,
R-407C, R-408A, R-409A, R-410A, R-500, R-502, R-507
(3�8 MPa, 38 bar) Compressor motor thermally protected
High side design pressure 550 PSI (3�8 MPa, 38 bar)
IV, & V in ARI standard 740
TM