Emerson InSinkErator indulge Serie Manuel Du Propriétaire page 3

COMPONENTS IN THIS PACKAGE
F-HC3300
F-H3300
F-HC2200 F-GN2200
F-HC2215 F-GN2215
F-HC1100 F-GN1100
Plug (1)
Y-Quick Connector
HWT-F1000S
HWT-HP
*
HWT-00
*
* (filtration system optional)
STOP
Snap-connect fitting not included. Required when replacing tank manufactured
STOP
prior to January 2006. Call the AnswerLine® 1-800-558-5700 to order.
4
Brass Seat
(HC3300, H3300)
Rubber O-Ring Hex Nut
Semi-circular Hex Tool
Mounting Plate
Filter Head
Filter Cartridge
1/4" Tubes (2)
Brass Nut/Ferrule/
Tube Insert
3/4" Screws (4)
If installing BOTH new faucet and new tank, skip to page 6.
IF INSTALLING ONLY NEW FAUCET
a
Release
Tab
1/4" 7/16" 5/16"
blue white clear
NOTICE
Property Damage: Unplug tank
before disconnecting tubing.
IF INSTALLING ONLY NEW TANK
a
Release
Tab
1/4" 7/16" 5/16"
blue white clear
NOTICE
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
Do not plug in the power to the hot water tank Until Step 6C. To avoid permanent
NOTICE
damage to the product, only operate the tank after it is filled with water.
Turn off water supply.
Release Remove tubes from tank: At tank
Ring
top, depress gray release tab into
1/4" 5/16" 7/16"
quick-connect fitting securing blue
blue or clear white
copper
or copper 1/4" tube and gently pull
line out of fitting. Pull white 7/16"
tube and clear 5/16" tube off fittings.
Remove existing faucet and continue
to page 6.
Turn off water supply.
Remove tubes from tank: At tank
Release
top, depress gray release tab into
Ring
quick-connect fitting securing blue
1/4" 5/16" 7/16"
blue or clear white
tube and gently pull line out of fitting.
copper
Pull white 7/16"
tube and clear 5/16" tube off fittings.
Remove existing tank and continue
to page 9.
To see a tutorial of this installation:
http://goo.gl/yYrfOA
5