Specifications - Optex Smart Line Serie Instructions D'installation

8

SPECIFICATIONS

Model
Maximum detection range
Maximum arrival distance
Detection method
Interruption time
Power source
3.6 to 3.9 V DC
D size Lithium
battery
Current draw
(stand by /at 25°C)
3.0 V DC
CR123A
D size Lithium
battery
Battery
life
*
CR123A
Alarm output
Alarm period
Output
Low battery output
Cover tamper output
(Receiver)
Alarm/ Level indicator
(Receiver)
Indicator
LED
Power/ Low battery indicator
(Transmitter and Receiver)
Operating temperature
Operating humidity
Alignment angle
Dimension
Weight
International protection
Specifications and design are subject to change without prior notice.
* Above battery life are confirmed with SB-D02HP manufactured by VITZROCELL or CR-123A manufactured
by PANASONIC that they are used within the ambient temperature range of 20 to 25 ℃. By using batteries other than
these recommended and due to the site conditions, the battery life can be shortened and low battery signal can be
generated in extremely short period. In such case, periodic battery replacement is recommended.
SL-100TNR
30 m/100 ft.
265 m/870 ft.
Selectable from 50/100/250/500 ms (4 selections)
3.6 to 3.9 VDC
(Recommended SB-D02HP manufactured by VITZROCELL)
3.0 VDC CR123A lithium batteries
Total:
Transmitter: Approx. 200 µA
Receiver:
Total:
Transmitter: Approx. 200 µA
Receiver:
Transmitter Approx. 6 years
Receiver Approx. 5 years
Transmitter Approx. 1.5 years
Receiver Approx. 1 year
H × W × D mm (inch): 295 (11.6) × 69 (2.7) × 117 (4.6)
1200 g (42.4 oz.) (Total weight of Transmitter + Receiver, excluding accessories)
EN-15
Twin infrared beam interruption detection
D size lithium batteries Each Transmitter and Receiver: 2 units
Each Transmitter and Receiver: 8 units
(with operational battery holder CRH-5: 2 units)
Approx. 500 µA
Approx. 300 µA
Approx. 600 µA
Approx. 400 µA
Form C-Solid State Switch: 3.9 VDC, 0.01 A
2 s (±1)
N.C. (Solid State Switch): 3.9 VDC, 0.01 A
N.C. (Solid State Switch): 3.9 VDC, 0.01 A
Opens when the battery cover removed.
ON: Beam not received
Blinking: Beam not received sufficiently
OFF: Beam received
ON: Power ON
Blinking: Voltage reduction
OFF: Power OFF
-20°C to +60°C (-4°F to 140°F)
95 % (max.)
±90° Horizontal, ±5° Vertical
IP65
SL-200TNR
60 m/200 ft.
530 m/1740 ft.
Total: Approx. 600 µA
Transmitter: Approx. 300 µA
Receiver: Approx. 300 µA
Total: Approx. 700 µA
Transmitter: Approx. 300 µA
Receiver: Approx. 400 µA
Approx. 5 years
Approx. 5 years
Approx. 1 year
Approx. 1 year