Ego Power+ LM2000-S Manuel De L'opérateur page 9

SERVICE
WARNING: Grass bag components, the discharge cover, side discharge chute, mulching insert and trailing shield are
subject to wear and damage, which could expose moving parts or allow objects to be thrown and could increase the risk
of injury. For safety protection, frequently check all components and replace damaged components immediately with
identical replacement parts, listed in this manual.
◾ ◾
If the mower's built-in overload protection switch frequently trips, contact EGO Customer Service or your closest
EGO service center.
◾ ◾
Do not wash the mower with a hose; avoid getting water in the motor and electrical connections.
◾ ◾
Remove the key and store the idle lawn mower indoors when not in use. Allow the motor to cool before storing it in
any enclosure. The lawn mower should be stored in a dry, high, or locked-up enclosure, out of reach of children.
◾ ◾
When servicing, use only identical replacement parts listed in this manual. Use of parts that do not meet the
original equipment specifications may lead to improper performance and compromised safety.
◾ ◾
Remove or disconnect the battery pack before servicing, cleaning, or removing material from the lawn mower.
◾ ◾
Follow instructions for lubricating and changing accessories.
◾ ◾
Keep handles dry, clean and free from oil and grease.
◾ ◾
To reduce a fire hazard, keep the motor cover free of grass, leaves and debris build-up.
◾ ◾
Check the blade and motor mounting bolts at frequent intervals for proper tightness. Also, visually inspect the blade
for damage (e.g., bending, cracking and wear.). Replace the blade only with the identical replacement blade, listed
in this manual.
◾ ◾
Maintain your mower with care – keep the mower blade sharp and clean for the best and safest performance.
Mower blades are sharp and can cut. Wrap the blade or wear gloves and use extra caution when servicing it.
◾ ◾
Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
◾ ◾
Never remove or tamper with safety devices. Regularly check their proper operation. Never do anything to interfere
with the intended function of a safety device or to reduce the protection provided by a safety device.
◾ ◾
Always stop the motor before making adjustments to a wheel or a cutting-height adjustment.
◾ ◾
After striking a foreign object, stop the motor, remove the key, and thoroughly inspect the mower for any damage.
Repair the damage before operating the mower.
◾ ◾
Maintain or replace safety and instruction labels, as necessary.
◾ ◾
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may use this tool.
If you lend this tool to someone else, also lend these instructions to them to prevent misuse of the product and
possibly injury.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2000-S
9