Facom 712B Notice D'instructions page 24

1. Current Clamp
For measuring AC/DC current.
2. Safety barrier
Helps to keep hands from touching conductors while
measuring current.
3. Rotary Switch
Used to select function and range.
4. MAX/MIN
Press the key to show the maximum reading value among
measuring data, and the "MAX" symbol appears on the
display, press the button again, the "MIN" symbol appears
on the display and will show the minimum reading value
among measuring data, press the key third time to return to
normal mode.
5. Backlight
Press the key to turn on the backlight. Press the key again
to manually turn off the backlight.
6. Display
Max. display value: 5999
7. Input Jack
Connection for the live (red) test lead for voltage,
resistance, capacitance, diodes and continuity.
8. COM Jack
Connection for the common (black) test lead.
9. A-HOLD
Press the key to keep the reading on the screen unless the
data is more than 5%. Press the key button again to return
the display to normal.
10. Clamp Trigger
Press the trigger to open the clamp jaw; release to close.
11. Worklight
When the rotary switch is in one of the current positions
and the Worklight is turned on, the worklight will turn off in
a minute.
24
NU-712B_0618 7 langues.indd 24 22/06/2018 11:50:58