SR Suntour SP8 NCX Mode D'emploi page 4

SR SUNTOUR - OWNERS MANUAL
INSTALLATION INSTRUCTIONS
Unscrew the two fixing bolts using a 5mm
Allen key.
Take off the upper clamp plate
Place the upper clamp plate on to the sadd-
le rail. Afterwards direct the gripper clamp
through the two saddle rails and over the
upper clamp plate.
Adjust the saddle that it is centered horizon-
tal like shown in picture right beside.
Fasten the two fixing bolts with 12Nm using
a 5mm Allen key.
SP8 NCX / SP8 NEX
5 mm
5 mm
12Nm
3
English