Basic Operations - Panasonic CZ-RTC3 Guide De Référence Rapide

Basic Operations

1
Start operation.
Press
(The operation indicator illuminates.)
 To change the setting
 To turn the energy saving
operation ON/OFF
Press during operation.
(Only for models equipped with the
energy saving function.)
 To stop
(The operation indicator turns off.)
2
Select the item to set.
Press ◄
3
Change the setting.
Press ▲▼ →
Note
 Operation modes that cannot be set are not displayed.
 The fl ap display differs from the actual fl ap angle.
 Pressing
the contents before mains power failure has occurred.
 If no operation is performed for a certain period of time, the back light turns off to
save electricity. (Press any button for illumination.)
 The energy saving operation restricts the maximum current value, resulting in
decreased cooling/heating performance.
(If the current of outdoor units does not reach the peak due to low load operation,
the current value is not restricted.)
 The temperature range that can be set varies depending on the model.
 The set temperature range can be changed using the remote controller.
 Some models do not display the fl ap.
8
(EN)
.
►.
.
(The cursor disappears.)
after recovery from mains power failure will resume operation with
Operation indicator
Energy saving operation
is in process.