WEGOMA Porta Master PM3000 Mode D'emploi page 31

Porta Master PM3000
ADDITIONAL SAFETY REGULATIONS FOR THE MACHINE
WARNING: NONOBSERVANCE OF SAFETY REGULATIONS CAN LEAD TO SERIOUS BODY
INJURIES!
•
•
•
•
•
•
•
•
•
•
•
•
GENERAL SAFETY REGULATIONS
! ! Please read these instructions carefully and store them. ! !
ATTENTION! To avoid electric shock, injuries and fire when using power tools the following safety
regulations must be followed. Read and observe these notes before you use the device. Careless
neglect makes all warranty claims void.
1. Keep your working space tidy!
• Untidiness in the working area means a higher risk for accidents.
2. Bear environmental effects in mind
• Do not expose power tools to rain. Do not use power tools in humid or wet environments. Make
sure there is enough light. Do not use power tools close to inflammable liquids or gases.
3. Avoid electric shock
• Electric shock is prevented by functional equipment grounding conductor. Eventually use error
current equipment grounding conductor.
4. Keep unauthorised persons away!
• Do not let other persons/children work with the device. Keep them away from your working
space.
5. Keep your tools in a safe place
• You should store not used tools in a dry and closed room and away from children.
6. Wear appropriate work clothes
• Do not wear wide clothes or jewellery. They could get into movable parts of the machine. We
recommend to wear rubber gloves and anti-slip shoes when you work outside. Should you have
long hair please wear a snood-type cap.
Do not place your hand into moving parts.
Attention! Glue container can become very hot!
Do not touch hot parts.
Always hold machine with both hands when operating the machine.
Do not bend over the machine.
Always make sure enough cable is available and this cable does not interfere
with using the machine.
Check connecting cable before each starting-up of the machine.
Do not conduct repair or maintenance work on heated up machine.
Never use close to inflammable or explosive materials.
Do not work in humid rooms or outside when it is raining.
Vapours will be released, always work in well ventilated rooms or use respirator
mask.
Make sure the machine has fully cooled down before you place it into the
styrofoam cover.
31