Making Alternative Milk; Mixing Cycle - Brewista NutraMilk BRNMC2L Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The default BUTTER time is 16 minutes. To increase the desired time, press the UP
button (17). To decrease the desired BUTTER time, press the DOWN button (18).
The UP and DOWN buttons (17 & 18) increase or decrease time by one minute.
Maximum possible BUTTER time is 25 minutes.
Timer will count down as the butter process runs.
When the butter process is complete, the LCD readout (16) will display "00".
To stop the butter process at any time, press the START/STOP button (22) and the LCD
readout (16) will display "00". Pressing any function button will also stop the butter
process.

Making Alternative Milk:

Mixing Cycle

First run a butter process as described in step 2 with at least 1 cup of the
ingredients of your choosing.
Once the butter process is complete and the machine is fully stopped, press
the release button (4), raise the arm (7), and open the lid (1) by turning it
counter-clockwise. Add 2 quarts (about 2 liters) of water to the nut butter in
the inner filter (5) (Illus. F).
-
Close the lid (1) and turn it clockwise to lock, lower arm (7), and press to lock
into top of lid (1).
Press the MIX button (20) (Illus. G) and then the START/STOP button (22)
(Illus. H) to mix the water with the butter.
The default mixing time is 1 minute. Press the UP and DOWN buttons (17 & 18)
to change to the desired mixing time.
-
-
To stop the mixing process, press the START/STOP button (22) again at any
time. The unit will display "00" on the LCD readout (16). Pressing any function
button will also stop the mixing process.
C
Note: Use cool water when making alternative milk. Do not use hot
water in your NutraMilk or you may damage your machine!
The UP and DOWN buttons (17 & 18) increase or decrease time by one
minute.
Maximum possible MIX time is 25 minutes.
F
D
G
E
H
7

Publicité

Table des Matières
loading

Table des Matières