Main Features of the HoMedics True HEPA Air Purifier
Control Panel
Main Unit
Replace Pre-filter Indicator Button
Power ON/OFF
Fan Speed Selection (Low/Medium/High)
Grill Cover
HEPA Filter
Pre-Filter
Replace HEPA Filter Indicator Button
1
2
3
4
Operating Instructions
Before Turning the Unit On
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm level surface.
• Locate the pre-filter inside the box and remove the protective plastic bag.
• Install the pre-filter and make sure the True HEPA filter is firmly in place.
Fig. 1
Fig. 2
Fig. 3
1. Open the back grill by pulling on
the tabs on either side of the top
of the grill cover. Fig. 1
2. Open the cover outward until
the tabs at the bottom of the grill
cover easily slide away from the
unit. Fig. 2
3. The top of the carbon pre-filter
has 2 slots for installation. Hang
the carbon pre-filter on the
top tabs and secure under the
bottom tabs. Fig. 3
5