Moulinex DFC1 Mode D'emploi page 15

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Functions of your food
processor
F
1
ITTING DETACHABLE PARTS
. A
/ D
SSEMBLING
(B3)
The bowl can be used with the following
accessories (depending on model):
. blades (D), grating/slicing discs (E), whisk
(F), emulsifying disc (G), citrus press (H),
juice extractor (J).
- If not already fitted,
- position drive (B3a) in the bowl.
- Lock the drive (B3a) with the nut (B3b) as
far as it will go.
- Dismantle the bowl assembly and clean it
after each use.
. F
/
ITTING
DISMANTLING THE BOWL HANDLE
(B4)
AND THE LIQUIDISER JUG HANDLE
For ease of cleaning and storage, the bowl
handle (B4) and liquidiser jug handle (I4) are
detachable.
- To fit the handle, position it against the lugs
of the bowl/jug.
- Slide the handle upwards until it clicks.
- To detach the handle, press the release
button (B4a) or (I4a) and slide the handle
downwards.
(note: Whether you are using the Liquidiser
jug (l3) or the bowl (B3) you will need to ensure
that the respective handle and lid have been
fitted correctly.
M
/B
/C
2
IXING
LENDING
A
CCESSORIES USED
- Bowl assembly (B), spindle (C) and blades
(D):
. metal blade (D1) for mixing or chopping.
. plastic kneading blade (D2) for kneading,
blending pastry and cake making.
F
ITTING THE ACCESSORIES
Press the release button (A4) to open the
liquidiser drive cover (A1).
- Fit the bowl (B3) on the bowl and accessory
drive (A3).
- Fit the spindle (C) on to the bowl drive (B3a).
- Slide the metal blade (D1) or the plastic
kneading blade (D2) onto the spindle (C),
pushing it down to the bottom of the bowl.
- Put the ingredients in the bowl.
- Fit the lid (B2) on the bowl.
ISMANTLING THE BOWL
(I4)
/K
HOPPING
NEADING
(
DEPENDING ON MODEL
- Close the liquidiser drive cover (A1). You
should hear an audible click.
To unlock the blades (D) from the spindle (C):
- Place the bowl assembly on a stable flat
worktop.
- Turn the spindle (C) clockwise, holding the
blade (D) by its upper section.
Note : If the lid and handle are not correctly
fitted on to the bowl, the appliance will not
start.
U
SAGE AND PRACTICAL TIPS
Blending
- Turn the speed selector (A5) to position "2"
to start the appliance.
You can blend up to 1 litre of soup or stewed
fruit in 20 sec.
Chopping
- Turn the speed selector (A5) to position "2"
to start the appliance or, for better control
over the chopping, use the "pulse" position.
In 15 to 30 sec., you can chop up to 600g of
food:
. hard produce: cheese, dried fruits, certain
vegetables (carrots, celery...).
. soft produce: certain vegetables (onions,
spinach...).
. raw or cooked meat (boned, sinew removed
and diced).
. raw or cooked fish...
Kneading/Mixing
- Turn the speed selector (A5) to position "2"
to start the appliance.
- When kneading, stop the appliance as soon
as the dough starts to form a ball.
You can:
. knead up to 1.2 kg of pastry/dough (biscuit,
shortcrust, and bread) in approximately 60
sec.
)
. mix up to 1 litre of pancake, waffle batter,
etc. in 1min to 1 min 30.
. mix up to 1.5 kg of light cake mixture (bis-
cuit, sponge) in 1 min 30 to 3 min 30.
G
/S
3
RATING
A
CCESSORIES USED
- Bowl assembly (B), spindle (C) and grating/
slicing discs (E)
F
ITTING THE ACCESSORIES
Press the release button (A4) to open the
liquidiser drive cover (A1).
- Fit the bowl (B3) on the bowl and accessory
drive (A3).
- Fit the required disc (E2) on to the disc holder
(E1).
15
LICING

Publicité

Table des Matières
loading

Table des Matières