Ⅰ. Introduction; Ⅱ. Safety; Ⅲ. Specifications - Falcon HJ1007 Manuel

Ⅰ. Introduction:
The automatic swimming pool floor cleaner HJ1007 is a new type of highly efficient swimming pool
cleaning equipment. Through its advanced computer controlled program, it can clean the pool floor
automatically without draining pool water. At the same time, it filters the pool water and gets rid of
suspended particles and sediments.
For safe operation, the cleaner works on DC 24V.
Please read this instruction manual carefully before use.
Ⅱ. Safety:
1, Position requirement of power supply unit：Refer to item 9 and 11 in "Important Precautions".
2, Requirement of power: Refer to item 3 in "Important Precautions".
Make sure the cleaner corresponds to your local voltage and frequency (hertz).
Ⅲ. Specifications:
1. Rated input voltage and frequency: 220V/50Hz, 110V/60Hz
2. Output Voltage: DC24V
3. Nominal output power: 150W
4. Working cycle: 1h/1.5h/2h
5. Cable length: 12m (39.37ft)
6. Maximum cleaning area: 60m² (for 12m cable in rectangle pool)
7. Filtering capacity: 20m³ /h
8. Filter density: 180/600µm (600µm for the beginning of season)
9. Water temperature of use(for cleaner): 10° C - 35° C / 50° F - 95° F
10. Creeping speed: 20m/min
11. IP Grade：Cleaner-IPX8
12. Working environment temperature(for power unit): 10° C - 40° C / 50° F - 104° F
13. Maximum pool depth: 2m
14. Climb slope: Maximum25°
Power supply unit-IPX5
5