Helpful Tips - Falcon HJ1007 Manuel

5.6 Filter net replacement
Press buckle to
disassemble

5.8 Helpful tips

i. Unplug power connection immediately after use (Do not do it with wet hand or naked
foot).
ii. The cleaner should not touch pool walls while lifting out to avoid scratching the pool
surface or any damage to the cleaner.
iii. Before lifting out from pool and placing on the pool edge, suspend the cleaner above
water surface for 10-15 seconds to release the water left inside the cleaner body.
iv. Please hold the cleaner handle to lift it out from pool and never pull the cable.
v. Use 600um filter at the beginning of season to reduce possibility of jet block.
F 5-15
18
Replace and press to
assemble