Falcon HJ1007 Manuel page 2

Important Precautions
1. This model applies to swimming pool with flat floor.
2. Do not power on the unit when it is outside of the water.
3. Make sure the power cord is connected to a leakage protective device and appropriate
earthed socket.
4. Do not operate the cleaner when there is people in pool.
5. Do not try to move the floaters along the electric cable. Leave them always in the original
positions.
6. Before power on, make sure the cable is fully released to avoid any winding, which could
affect the cleaner's performance or cause damage.
7. The filter tray should be cleaned after use. This will prevent the dirty filter tray affecting the
normal operation of the cleaner.
8. The cleaner should be stored in a cool and ventilated place, away from direct sunlight.
9. The power supply unit should be placed in a shaded area. In order to avoid overheating and
the potential damage of components, never cover the power supply unit.
Only authorized personnel should open the cleaner's motor assembly and power supply unit,
10.
fail to do which will cause a invalid warranty.
11. In order to avoid any accident/damage, the power supply unit should be steadily placed at a
minimum distance of 3.5m from the pool edge.
12. Do not use the cleaner beyond the working environment/conditions stated in this manual.
Read this manual carefully before use.
13. Do not uncover the button film on the power supply unit.
14. Close the filtering system of your pool when use this cleaner.
15. Slightly water pollution may occur in case grease in motor seal oil leaks.
This model only applies to small pools that corresponding to cleaner's cable length, there is
16.
risk for the cleaner to work in a too big pool to cause pulling the cleaner upside down by the
limited cable.
2