Falcon HJ1007 Manuel page 10

5.3 Function and adjustment of nozzle
There are two nozzles on the cleaner, one of them opens once the other closes. Water flows out
through the opening nozzle to thrust the cleaner move forward. Adjust the nozzle by rotating it to
control the moving path.
5.3.1 Settings of nozzle
Nozzle angle from 0° to 60°
Cleaner moves in approximately straight line when nozzles in position 0° .
Cleaner moves in curved line when angle is set from 0° to 60° .
Note: A full coverage is not guaranteed for some of free shape pools.
5.3.2 Recommended cycle and nozzle settings:
Setting 1 (Default Setting), 0° / 60° , for most pools.
Nozzle
F. 5-4
10