Settings - Klarstein 10032102 Manuel D'utilisation

EN
38

SETTINGS

Clock and Grinder settings
Plug in machine. The display shows „12:00" blinking.
Note: You must set the actual time before you can operate the coffee maker.
a) Setting the Actual Time
• Push and hold the HOUR button until the actual hour is displayed. The display will
also show AM or PM.
• Push and hold the MINUTE button until the minutes are displayed. The time is now
set.
Note: You must change the clock when the time changes (Standard Time / Daylight
Savings Time).
b) Setting the Auto-On Time
You can only set the Auto-On Time after the actual time is set.
• Push and hold the AUTO button for 2-3 seconds until the display illuminates with the
clock icon and the clock icon starts blinking.
• Push and hold the HOUR, then the MINUTES button to set Auto-On time.
• If you will be using the grinder, select the number of cups you would like to brew
automatically by pressing the CUPS button. You may also choose to program the
machine to automatically brew with ground coffee. Push the GROUND COFFEE
button. Once pressed the CUPS number will disappear and the ground coffee
scoop icon will illuminate.
Note: You must program the CUPS button in Auto-On setting when using the grinder
to obtain the correct ground coffee volume to correspond to the number of cups you
will be brewing. See Grind Volume Setting below.