Lenze EMF2176IB Instructions De Montage page 18

Design as service interface
Function
Via the PC you are able to monitor the system during operation, e.g. with the Global Drive
Control program (GDC).

Note!
The connection of the PC system bus module is described in the Mounting
ƒ
Instructions supplied with the module.
Note the baud rate set in the system on the CAN repeater. This helps to
ƒ
avoid bus failures and facilitates the work of the service personnel.
Basic circuit diagram
CAN 2.1
HI LO GND HI LO GND
2173-V003
PC
CAN 2.1 ... CAN 2.n
EDKMF2176X DE/EN/FR 4.2
Electrical installation
Design as service interface
CAN 2.n
HI LO GND HI LO GND
HI LO GND
HI LO GND
2173-V003
PC system bus module 2173, version V003 (with electrical isolation)
PC with PS/2 connection
Nodes in the segment CAN2, max. 63 nodes possible
CAN2 +24 GND
CAN1
PC
18
+24 V DC
=
(+9 ... +35 V DC)
2176

2176_003