Helpful Symbols; Safety Information - AquaScape AQUAFORCE 1000 Manuel D'instructions Et D'entretien

Masquer les pouces Voir aussi pour AQUAFORCE 1000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Contents
No.
Description
1.
(1) AquaForce Pump
(1) 1", 1.25", 1.5" Multi-Hose
2.
Adapter
3.
(1) 1.5" Rotational Ball Output
4.
(1) 1.5", 2" Multi-Hose Adapter
5.
(1) 1.5" Female Fitting

Helpful Symbols

WARNING Symbol - Will alert your to the
possibility of damage or injury if you do not
comply with the warnings that accompany them.
The hazard may come from something
mechanical or from electrical shock.

Safety Information

WARNING: Risk of electric shock – This pump
has not been approved for use in swimming
pool or marine areas.
WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only, using the
following guidelines:
(A) Have a qualifi ed electrician install a properly
grounded receptacle outlet, acceptable for outdoor
use and protected from snow and rain.
(B) Inspect cord before using.
(C) Do not use extension cords.
(D) Any wiring of pumps should be performed by a
qualifi ed electrician to ensure code compliance
and user safety.
(E) Unplug pump at receptacle outlet when not
in use and before removal from pond.
1
TIP symbol - Helpful information provided by a
professional pond installer.
(F) To reduce risk of electrical shock, all wiring
and junction connections should be made per local
codes. Requirements may vary depending on usage
and location.
(G) The power cable should be protected at all times to
avoid punctures, cuts, bruises and abrasions.
(H) Never handle power cords with wet hands.
(I)
Do not remove cord and strain relief. Do not
connect conduit to pump.
(J) Do not use power cable to lift pump.
2
3
4
5
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Aquaforce 1800Aquaforce 2700Aquaforce 3600Aquaforce 5200

Table des Matières