Bosch TASSIMO TAS40 Serie Notice D'utilisation page 27

Masquer les pouces Voir aussi pour TASSIMO TAS40 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
Problem
Brewing unit cannot be
securely closed.
Water dripping from
the brewing unit.
Water on the surface
under the cup stand.
Service T DISC is
damaged or lost.
P
Fill tank lights up
even though there is
sufficient water in the
tank.
P
Q
6d and
6e
are flashing simulta-
neously and it is not
possible to prepare
drinks.
Descale flashes
Q
even though you
are using filtered or
softened water.
Possible cause
The T DISC is not inserted
properly.
The T DISC holder is not
properly inserted.
The brewing unit is not
properly closed.
The T DISC is damaged or
leaky.
The piercing unit is either
not inserted or not inserted
properly.
Water from condensation.
The Service T DISC must
always be used for cleaning
and descaling processes.
The float in the water tank is
stuck.
There is a fault on the
machine.
Even softened water contains
small amounts of dissolved
lime.
Solution
Re-insert the T DISC and
make sure it is properly
positioned.
Insert the T DISC holder
properly.
Push the clamp down firmly
until it audibly clicks into place.
Stop the brewing process,
remove the T DISC and clean
the brewing unit.
Check to ensure that the
piercing unit is inserted
properly.
Condensation may occur and
is not a fault. Remove it by
wiping with a cloth.
Contact the
TASSIMO careline.
08 00 032 88 33
Clean the water tank and
ensure that the float can
move.
Contact the
TASSIMO careline.
08 00 032 88 33
Descale the appliance.
25
11 /2007

Publicité

Table des Matières
loading

Table des Matières