Descaling - Bosch TASSIMO TAS40 Serie Notice D'utilisation

Masquer les pouces Voir aussi pour TASSIMO TAS40 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

22

Descaling

Your TASSIMO machine has an automatic
descaling programme. If
icon lights up while the appliance is on,
the descaling programme must be run
immediately. If the descaling process is
not run as instructed, the appliance may
become damaged.
9
ca.
20 min.
Robert Bosch Hausgeräte GmbH
Descale
Q
3 sec.
Special descaling agents can be
obtained from your retailer or from our
customer service department.
i
Note: Never interrupt the descaling
programme.
Do not drink the liquids.
Never use vinegar or vinegar-based
products.
Running the descaling programme
Remove the water tank from your
TASSIMO machine and take the Service
T DISC out (9). Insert it in the brewing
unit with the barcode face down, and
close the clamp down firmly.
Prepare descaling solution according to
the manufacturer's instructions and pour
500 ml into the water tank. (Increase the
amount of descaling solution for hard
water). A specially developed descaling
agent is available from our TASSIMO
careline. Order no.: 310967
Remove the cup stand and place a
suitable container (min. 500 ml capacity)
under the drink outlet.
Press and hold the start /stop button for
at least 3 seconds to start the descaling
programme.
The programme now proceeds automati-
Descale and
Q
cally and
icons flash. (Duration approx. 20
minutes). The descaling solution is
pumped through the appliance at intervals
and then runs into the container until the
water tank is almost empty. A little liquid is
always left in the tank.
en
O
Automatic

Publicité

Table des Matières
loading

Table des Matières