Installation Instructions; Operation Instructions - Royal Sovereign RMF-215SS Guide D'utilisation

INSTALLATION INSTRUCTIONS

1. The refrigerator should be located in a completely flat surface , Leave 5-10CM (2-4 inches)
between each side of the refrigerator and the wall, and leave 30 cm (12 inches) between
the top of the refrigerator and the ceiling.
2. Choose a location which is not exposed to sunlight , high temperature or humid ,
as humidity may cause stain
3. Pull out the bottom panel before installation.
4. The refrigerator can be adjusted by turning its two legs on front bottom when it
is unstable. Turn clockwise to raise up the machine.
5. The location should be firm and flat. An unsecured position may cause noise
and vibration: (a)The noise may be increased if the floor is not firm. (b) Put a
sheet under the refrigerator for solving the heat emission if you need to locate it
onto a carpet.
6. Make sure the adjustable legs are clung to the floor, and set the refrigerator slope
backward slightly for keeping the doors closed tightly

OPERATION INSTRUCTIONS

PLACEMENT OF FOOD
1. There should always be some space between items inside for air circulation
2. Food should be kept in sealed package to avoid becoming dry or with odour.
3. Hot food should be cooled down before placing into the refrigerator. Otherwise,
interior temperature and electronic consumption will increase.
4. Reducing the frequency of door opening can significantly lower the
electronic consumption.
Warning: Do not use any electronic equipment inside the refrigerator
INSTRUCTION FOR USAGE
The temperature of refrigerator can be controlled manually by the knob. However, the number shown on the knob does not
directly represent the temperature. Instead, the larger the number is, the lower the interior temperature will be. 0 stands for
5
RMF-215SS